Table of Contents
Advertisement
•
Replace the battery only with an IEEE-Std-1725 standard qualified
battery. The use of an unqualified battery may lead to fire, explosion,
leakage, or other hazards.
•
Do not disassemble or open, crush, bend or deform, puncture or shred
the battery. Otherwise, it may lead to electrolyte leakage, overheating,
fire, or explosion.
•
Do not solder battery poles or dismantle the battery. Doing so may lead
to electrolyte leakage, excessive heat, fire, or explosion.
Cleaning and maintenance
•
Keep the device and accessories dry. Do not attempt to dry it with an
external heat source, such as a microwave oven or hair dryer.
•
Do not expose your device or accessories to extreme heat or cold.
These environments may interfere with proper function and may lead to
fire or explosion.
•
Avoid collision, which may lead to device malfunctions, overheating, fire,
or explosion.
•
Before you clean or maintain the device, stop using it, stop all
applications, and disconnect all cables connected to it.
•
Do not use any chemical detergent, powder, or other chemical agents
(such as alcohol and benzene) to clean the device or accessories.
These substances may cause damage to parts or present a fire hazard.
Use a clean, soft, and dry cloth to clean the device and accessories.
•
Do not place magnetic stripe cards, such as credit cards and phone
cards, near the device for extended periods of time. Otherwise the
magnetic stripe cards may be damaged.
•
Do not dismantle or remanufacture the device and its accessories. This
voids the warranty and releases the manufacturer from liability for
damage. In case of damage, contact an authorized service center for
assistance or repair.
•
If the device screen is broken in a collision, immediately stop using the
device. Do not touch or attempt to remove the broken parts. Promptly
contact an authorized service center.
Advertisement
Table of Contents
