Key Installation Requirements; Tools Needed For Installation; Replacement Parts And Accessories - Samsung DV365ETBGWR/AC User Manual

KEY INSTALLATION REQUIREMENTS

Hire a professional to install this dryer properly. If a service call has to be made as a result of poor setup,
adjustment, or connection, it is considered the responsibility of the installer. If you install the dryer, you are
responsible.
Make sure you have everything necessary for proper installation:
• A GROUNDED ELECTRICAL OUTLET. See Electrical Requirements. See page 15.
• A POWER CORD for electric dryers (except Canada). See page 16.
• GAS LINES (if you are installing a gas dryer) must meet national and local codes.
• EXHAUST SYSTEM – must be rigid metal or flexible stiff-walled metal exhaust ducting. See the ducting
and exhaust requirements on pages 10 - 11 and 13 and the dryer exhaust tips on page 20.

TOOLS NEEDED FOR INSTALLATION

Gather the required tools and parts before starting the installation.
Read and follow the instructions provided with any tools listed here.
Tools and Parts
Pliers
Level

REPLACEMENT PARTS AND ACCESSORIES

If your dryer requires replacement parts or accessories, contact the dealer from whom you purchased your
dryer or the SAMSUNG customer care center at
DV365-03064C-01_EN_20121018.indd Sec11:9 DV365-03064C-01_EN_20121018.indd Sec11:9
Cutting knife Pipe wrench (gas only)
Phillips Screwdriver
1-800-SAMSUNG (726-7864
Nut drivers
Duct tape Wrench
).
installing your dryer _9
2012-10-18 2012-10-18 8:28:54 8:28:54