Technical Support Assistance If further assistance is required, please contact: Product support at 1.866.907.0122 (09:00 - 17:00hrs PST) or email technical@blubathworks.com North America Blu Bathworks Inc. 188 Smithe Street, Vancouver BC, Canada, V6B 6A9 T+1.604.299.0122 F+1.604.299.0125 2014-07 1 866 907 0122...
Page 3
Attaching the in-wall box for controller Note: The diagrams in this install indicate single wheel for basin installation (PT7001). For dual wheel installation (PT7003/PT7005) duplicate these steps. In-wall box attached from ‘behind’ In-wall box attached from ‘front’ • Prepare the wall to take the in-wall box. The installation of the in-wall box will depend on each individual situation i.e.
Page 4
Finish the wall 1½" [40] Hole size in tile or finished wall • Finish the wall by tiling etc. A 1 1/2" (40mm) diameter hole should be drilled in the tile (or alternative wall surface) to finish. • After installing the in-wall box(es), finished wall thickness may be 1" (25mm) maximum. 2014-07 1 866 907 0122 blubathworks.com...
Page 5
• Draw a line around the bracket collar of the in-wall box flush with the wall. • Cut down the bracket collar of the in-wall box as marked. • Position the plastic adaptor ring inside the round trim plate/foam gasket and fix through the adaptor ring holes into the bracket collar of the in-wall box using the (4) 15mm screws supplied.
Page 6
• Feed the data cable of the controller unit through the in-wall box collar. NOTE: For ease of installation, the socket can be taped to the wire. • Position the control wheel into the bracket and turn clockwise to lock in position. •...
® residential use for a period of five (5) years from the date of purchase. Blu will, at its election, repair, provide a replacement part or product, or make appropriate adjustment, subject to the terms and conditions set forth in this warranty.
Need help?
Do you have a question about the UNO PT7001 and is the answer not in the manual?
Questions and answers