Related Manuals for Blu PT7002
Summary of Contents for Blu PT7002
- Page 1 Installation Guide PT7002 PT7004 PT7006 UNO · basin DUO·1 · bathtub DUO·2 · shower 2014-06 1 866 907 0122 blubathworks.com...
- Page 2 Technical Support Assistance If further assistance is required, please contact: Product support at 1.866.907.0122 (09:00 - 17:00hrs PST) or email technical@blubathworks.com North America Blu Bathworks Inc. 188 Smithe Street, Vancouver BC, Canada, V6B 6A9 T+1.604.299.0122 F+1.604.299.0125 2014-07 1 866 907 0122...
- Page 3 Note: The diagrams in this install indicate single wheel for basin installation (PT7002). For dual wheel installation (PT7004/PT7006) duplicate these steps. • Unscrew and remove the nut and washer from the controller unit and data cables. • Carefully pull the ‘front’ control wheel off the controls, taking care not to mix them up.
- Page 4 round trim plate • Prepare the basin/countertop or the tub to take the controller unit. 35mm / 1½" diameter holes are required to fit the threaded sleeve. • Feed the control data cables through the holes, then insert the controller unit. 2014-07 1 866 907 0122 blubathworks.com...
- Page 5 • Feed the washer and nut onto the control data cables. • Hand tighten onto the controller unit bodies. Help may be required at this stage. • Push fit the ‘front’ control wheels onto controller unit. • If required the controller unit can be removed from the controller unit/threaded sleeve by pulling off the front control wheel, turning the controller unit counter-clockwise and lifting out.
- Page 6 PT7002 2014-07 1 866 907 0122 blubathworks.com...
- Page 7 PT7004 2014-07 1 866 907 0122 blubathworks.com...
- Page 8 PT7006 2014-07 1 866 907 0122 blubathworks.com...
-
Page 9: Warranty
® residential use for a period of five (5) years from the date of purchase. Blu will, at its election, repair, provide a replacement part or product, or make appropriate adjustment, subject to the terms and conditions set forth in this warranty.
Need help?
Do you have a question about the PT7002 and is the answer not in the manual?
Questions and answers