Table of Contents
Advertisement
Note
• After completing the settings, you can check the Network name(SSID), Security protocol, and
WL Direct net.(SSID) by displaying them.
• When displaying the Security protocol, a screen appears asking whether to display the
password at the same time. To display the password, select Yes. To not display the password,
select No.
• The password is required when connecting a device to the printer. Depending on the device you
are using, no password is required.
• When you connect a Wi-Fi Direct compatible device to the printer, select the printer name from
your device.
• To change the identifier (SSID) and the password, see below.
Changing Wireless Direct Setting
Connecting a smartphone/tablet/computer to the printer
1. Enable Wi-Fi function on smartphone/tablet/computer.
Enable Wi-Fi in the Settings menu on your smartphone/tablet/computer.
For instructions on enabling the Wi-Fi function, refer to the instruction manual for your smartphone/
tablet/computer.
2. Select "DIRECT-XXXX-G3020series" ("X" represents alphanumeric characters) from list
on your smartphone/tablet/computer.
Note
• If "DIRECT-XXXX-G3020series" does not appear on the list, Wireless Direct is not enabled.
See
Changing Printer Setting to Use Wireless Direct
3. Enter Password on smartphone/tablet/computer.
The smartphone/tablet/computer is connected to the printer.
Note
• Check the password for the Wireless Direct.
Check by one of the following methods.
Display on the LCD of the printer.
LAN settings
Print the network settings.
Printing Network Settings
• Depending on the device you are using, entering the password is required to connect a device
to the printer via Wi-Fi. Enter the password specified for the printer.
to enable Wireless Direct.
45
Advertisement
Table of Contents
