Connection; Audio Connection - Yamaha DVD-S830 Owner's Manual

Connection

Audio connection

[Note]
≥The equipment connections described are
examples.
≥Peripheral equipment and optional cables sold
separately unless otherwise indicated.
≥Before connection, turn off all equipment and
read the appropriate operating instructions.
Digital connection
A
Connect an amplifier with Dolby Digital
and DTS decoders.
You can also enjoy high-quality stereo
sound with sampling frequencies of 88.2
and 96 kHz if the material isn't copy-
protected and the equipment you connect
is compatible with these signals.
Change "Digital output" (
Insert fully,
with this side
facing up.
Coaxial cable
Optical digital
audio cable
COAXIAL OPTICAL
DIGITAL INPUT
6
Analogue (6CH DISCRETE) connection
B
Connect an amplifier with multi-channel audio input
terminals to enjoy surround sound.
This unit can decode Dolby Digital and DTS and there
are no limitations on sampling frequency with this kind
of connection.
To obtain maximum performance of DVD-Audio multi-
channel linear PCM sound, the connections are
recommended.
page 19). Change "Speaker setting" (
Do not bend
sharply when
connecting.
CENTER SUB
Amplifier
page 20).
Audio pin
cable
SURROUND MAIN
(R) (L) (R)
WOOFER
6 CH INPUT
Speakers
(example)
Analogue (MIXED 2CH)
C
connection
Connect these jacks to the AUDIO L
and R input jacks of your amplifier using
the supplied Audio/Video cable.
(R) (L)
(L)
AUDIO
Amplifier
Audio/video cable
(included)
See "Video
connection"
( page 7)
Speakers
(example)