3 Get started
Always follow the instructions in this chapter in
sequence.
Install battery
Warning
•
Risk of explosion! Keep the battery away from heat,
sunshine or fire. Never discard the battery in fire.
•
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
•
The battery contains chemical substances, so it should
be disposed of properly.
Note
•
You can only use AC power as power supply. The
lithium CR2032 battery can only back up time and
alarm settings.
•
When power is disconnected, the display backlight
turns off.
For first-time use
Remove the protective tab to activate the
battery.
To replace the battery
Connect power
Caution
•
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the clock radio.
•
Risk of electric shock! When you unplug the AC
adapter, always pull the plug from the socket. Never
pull the cord.
Set clock
1
In standby mode, press and hold SET TIME
for two seconds.
2
Press - HR/HR + (or - MIN/MIN +) to
select 12/24 hour format.
3
Press SET TIME to confirm.
» The hour and minute digits blink.
EN
5