Page 1
LED TV UF69** UF77** www.lg.com UF69** 79UF77** 43/49UF77** (M4 X L14) (M4 X L16) UF69** 79UF77** 43/49UF77** P/No: MFL68901424 (1505-REV03) Printed in Korea...
Page 4
UF69** UF77** UF77*V OPTICAL AUDIO OUT/ DIGITAL H/P OUT AUDIO OUT 13/18V 700mA Max ANTENNA / CABLE IN Satellite IN VIDEO AUDIO...
Page 5
UF69**, 43/49UF77** SVC ONLY ANTENNA / CABLE IN VIDEO AUDIO VIDEO AUDIO MONO...
Page 6
79UF77*T, 79UF77*Y SVC ONLY ANTENNA / CABLE IN VIDEO AUDIO MONO VIDEO AUDIO...
Page 7
79UF77*V SVC ONLY 13/18V 700mA Max ANTENNA / CABLE IN Satellite IN VIDEO AUDIO MONO VIDEO AUDIO...
Page 9
79UF770T-TB 43UF690T-TC 49UF690T-TC 43UF772T-TP 49UF772T-TP 79UF770V-TB 43UF690Y-TC 49UF690Y-TC 79UF770Y-TB 971 X 624 X 198 1103 X 698 X 198 971 x 628 x 179 1104 x 708 x 231 1770.4 X 1083.2 X 317 (mm) 971 X 575 X 58.7 1103 X 650 X 58.7 971 x 570 x 56.4 1104 x 645 x 56.7...
Page 13
OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. www.lg.com *MFL68780113* P/NO : MFL68780113 (1511-REV04) Printed in Korea...
Safety instructions Please read these safety precautions carefully before using the product. WARNING Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured. Do not place the TV and/or remote control in the following environments: • ...
Page 15
Do not drop the product or let it fall over when connecting external Do not drop metallic objects such as coins, hair pins, chopsticks or wire devices. Otherwise, this may result in injury or damage to the product. into the product, or inflammable objects such as paper and matches. Children must pay particular attention.
Page 16
Only use the attachments / accessories specified by the manufacturer. Only use an authorized AC adapter and power cord approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction or product deformation. When installing the antenna, consult with a qualified service technician.
Page 17
We recommend that you maintain a distance of at least 2 to 7 times Do not turn the product On/Off by plugging-in or unplugging the power the diagonal screen size when watching TV. If you watch TV for a long plug to the wall outlet.
Page 18
Do not press strongly upon the panel with a hand or sharp object such When moving or unpacking the product, work in pairs because the as nail, pencil or pen, or make a scratch on it, as it may cause damage product is heavy.
Page 19
Viewing 3D imaging (Only 3D models) WARNING You may find different brightness and color of the panel depending on Viewing environment your viewing position(left/right/top/down). This phenomenon occurs due to the characteristic of the panel. It is not • Viewing Time related with the product performance, and it is not malfunction.
Page 20
Cautions when using the 3D glasses • Do not use any unapproved items to ensure the safety and product • Make sure to use LG 3D glasses. Otherwise, you may not be able to life span. view 3D videos properly.
AG-F***DP Cinema 3D Glasses Magic Remote Dual Play Glasses AN-VC550 LG Audio Device Smart camera • Hold the top and bottom of the TV frame firmly. Make sure not to Maintenance hold the transparent part, speaker, or speaker grill area.
Using the joystick button Mounting on a table (Image shown may differ from your TV.) (Image shown may differ from your TV.) You can simply operate the TV functions, pressing or moving the joystick 1 Lift and tilt the TV into its upright position on a table. button up, down, left or right.
We recommend the use provided with the Kensington security system or visit http://www. of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with kensington.com. Connect the Kensington security system cable between cables connected.
Page 24
• If you install the TV on a ceiling or slanted wall, it may fall and Flat tool result in severe injury. Use an authorised LG wall mount and contact the local dealer or qualified personnel. (B Type) • ...
Connections (notifications) Satellite dish connection (Only satellite models) Connect the TV to a satellite dish to a satellite socket with a satellite RF Connect various external devices to the TV and switch input modes to cable (75 Ω). select an external device. For more information of external device’s connection, refer to the manual provided with each device.
Other connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. INPUT Q.MENU Some separate cable is not provided. • Picture HDMI ULTRA HD Deep Colour - On : Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0) - Off : Support 4K @ 50/60 Hz (4:2:0)
Q.VIEW GUIDE MUTE Magic remote functions RECENT (Depending on model) When the message “Magic remote battery is low. Change the battery.” is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) LIVE MENU EXIT BACK matching the...
Page 28
wxyz pqrs LIST INFO EXIT Registering magic remote How to register the magic remote To use the Magic Remote, first pair it with your TV. GUIDE 1 Put batteries into the Magic Remote and turn the TV on. 2 Point the Magic Remote at your TV and press the Wheel (OK) on the remote control.
External control device Precautions to take when using the magic remote setup • Use the remote control within the specified range (within 10 m). You may experience communication failures when using the To obtain the external control device setup information, please visit device outside the coverage area or if there are obstacles within www.lg.com. the coverage area. • You may experience communication failures depending on the accessories. Troubleshooting Devices such as a microwave oven and wireless LAN operate in the same frequency band (2.4 GHz) as the Magic Remote. This may cause communication failures. Cannot control the TV with the remote control. • The Magic Remote may not work properly if a wireless router (AP) • Check the remote control sensor on the product and try again. is within 1 meter of the TV. • Check if there is any obstacle between the product and the remote Your wireless router should be more than 1 m away from the TV. control. • Do not disassemble or heat the battery. • Check if the batteries are still working and properly installed ( ...
Specifications CI Module (W x H x D) 100.0 mm x 55.0 mm x 5.0 mm Operating 0 °C to 40 °C Temperature Wireless module specification • Because band channel used by the country could be different, the Operating Less than 80 % Humidity user can not change or adjust the operating frequency and this Environment...
Page 31
(Jordan region only) WEEE Disposal of your appliance The symbol indicating separate collection for electrical and electronic equipment consists of the crossed-out wheeled bin. 0197 0197...
Page 32
021 36 54 54 in Algeria Other countries, Please contact our local dealer or log into http://www.lg.com (Only DTV) Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com...
KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button...
Page 35
(TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (TV) (PC) • It can be purchased from computer stores that carry accessories for IT support professionals.
Page 36
EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &...
Page 37
EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
Page 38
EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
Page 39
EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
Page 40
EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 14. Bass (Command: k s) 09. Tint (Command: k j) ► To adjust Bass. ► To adjust the screen tint. You can also adjust in the AUDIO menu.
Page 41
EXTERNAL CONTROL DEVICE SETUP Set ID = All = 00 5th Band 20(decimal) Data 00 & 01 = Channel Data is 10 = 00 0a Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00 * It depends on model, and can adjust when sound mode is EQ adjustable value.
Page 42
EXTERNAL CONTROL DEVICE SETUP Number Data 05 = Digital Antenna TV = 02 - 22 : Antenna TV (DTV) – Don’t Use Physical Total = ma 00 00 00 11 00 01 02 Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical 2.
Page 43
11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data X : don’t care 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] ISDB-BS (Japan)
Page 44
EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : Run Auto Configure Ack [u][ ][Set ID][ ][OK/NG][Data][x]...