Sleep Timer Setting; Dimmer; Turn Off The Sound Temporarily; Last Scene Memory - LG DH6340P Owner's Manual

Sleep Timer Setting

Press SLEEP one or more times to select delay time
between 10 and 180 minutes, after the unit will
turn off.
To check the remaining time, press SLEEP.
To cancel the sleep function, press SLEEP
repeatedly until "SLEEP 10" appears, and then press
SLEEP once again while "SLEEP 10" is displayed.
,
Note
You can check the remaining time before the
Unit turns off.
Press SLEEP The remaining time appears in the
display window.

Dimmer

Press SLEEP once. The display window will be
darken by half. To cancel it, press SLEEP repeatedly
until dim off.

Turn off the sound temporarily

MUTE to mute your unit.
Press
You can mute your unit in order, for example, to
answer the telephone, appears the MUTE in the
display window.

Last Scene Memory

r
This unit memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.

Power Resume - Optional

r
Even if the power suddenly goes out, turn on the
unit and then it plays a position where the contents
is being played. System will periodically save
current playback status.

System Select - Optional

You must select the appropriate system mode for
your TV system. Press and hold M PAUSE/STEP
for more than five seconds to be able to select a
system in the [Home Menu].
,
Note
If the USB device is connected or a disc is
inserted, this function is not operated.
Adjust the speaker level
settings
You can adjust the sound level of each speaker.
1. Press SPEAKER LEVEL repeatedly to select a
desired speaker to set.
2. Press VOL -/+ to adjust the sound level of the
selected speaker while the level setting memu
is displayed on the display window.
3. Repeat and adjust the sound level of the other
speakers.

VOCAL FADER

You can enjoy the function as karaoke, by reducing
singer vocal of music in the various source. (MP3/
WMA/ CD/ etc.) Press the VOCAL FADER, and
"FADE ON" will appear in display window.
To cancel it, press VOCAL FADER again.
The quality of the VOCAL FADER may be different
depending on the recording conditions of music
files.
,
Note
y This function is available to use only when a
microphone is connected.
y It is not available on the MONO source.

Auto power down

This unit will be off itself to save electric consumption
in the case main unit is not connected to external
device and is not used for 20 minutes. So does
this unit after six hours since Main unit has been
connected to other device using analog input.
Operating 33
4