Installing And Charging The Battery Pack - WowWee Rovio 8033 User Manual

Installing and charging the battery pack

Before you use your Rovio, you need to install and charge the battery pack.
To install the batteries:
1. Locate and open the battery compartment door on the underside of Rovio.
2. Using a Phillips screwdriver (not included) loosen the two screws on the
battery compartment door and remove it.
3. Locate and note the orientation of the battery connector and connect it to the
battery. Insert and connect the battery according to the diagram in step 2.
4. Replace the battery compartment door and tighten the screws using the
screwdriver. Do not over-tighten.
Installing and charging the battery pack
Getting started
13