Assembling The Charging Dock - WowWee Rovio 8033 User Manual

Assembling the charging dock

To assemble the charging dock:
1. Place the charging dock on the floor in the room you want to use as Rovio's
home base.
2. Attach the mast to the charging dock by slotting it into position as illustrated.
3. Plug the power cable into the port on the back
of the charging dock and then plug the power
adapter into the electrical outlet.
The LED indicator on the charging dock will
light up, and the TrueTrack Beacon attached to
the dock will light up red.
If the LED indicator on the base does not light
up, it means that there is a problem with the
connection between the mast and the base.
Unplug the power adapter, and detach the mast. To learn how, refer to the
section Disassembling the charging dock. Next, reattach the mast and then
reconnect the adapter.
If the Beacon is not lit, touch the metal rim on the Beacon and it will light up.
Getting started
Assembling the charging dock
11