LG ARUN80LN3 Installation Manual page 93

Integrated Test Running Function_Heating Mode (Setting 4)
This function is checking process for normal operation of parts and system On operating system.
• All processes carry out included refrigerant amount judge logic and check normal condition of parts on heating
mode.
• This function check only normal condition of parts on heating mode.
• Saved data can check using LGMV.
Press the black button for 2 sec.
Temp. Condition
Error Display
All IDU operation data(10min)
(All-1) IDU operation
1 IDU operation
Oil return operation
System off
Note
1. Judge the normal condition refer to report of Test Running.
Start
No
Yes
Note 1
DIP Switch Settings
Warning : Please reset Main PCB before starting this function
Error Display
End
Press the black button for 2 sec.
after turning off all of Dip switch.
Completed
Installation Manual 93
Test Run