Adjusting The Sound - Sanyo LCD-40XAZ10F Instruction Manual

Adjusting the sound

AUDIO
Sound Mode
Equalizer
Balance
Surround
AVC
Nicam
Move OK
AUDIO
0 0 0
300 1K 2K
Move Adjust
Equalizer Setting Sub-Menu
Stereo/Bilingual Selection
You can quickly select sound multiplex mode by using the AUTO/STEREO button on the remote control.
NICAM Broadcast Selection
This enables the selection of the reception mode when receiving a NICAM signal. To let you enjoy NICAM
broadcasting, this TV set receives NICAM system stereo, bilingual, and monaural broadcasts.
Stereo
When the TV set is receiving a stereo broadcast, press the Stereo button to select Stereo or Force Mono.
Bilingual
When the TV set is receiving a bilingual program, press the Stereo button to select Dual 1 or Dual 2.
Note: Be sure to set Nicam to Auto through AUDIO menu.
IGR (German stereo system) Broadcasts
This enables the selection of the reception mode when receiving an IGR signal. To let you enjoy IGR broadcasting, this
TV set receives IGR system stereo and bilingual broadcasts.
Stereo
When the TV set is receiving a stereo broadcast, press the Stereo button to select Stereo.
Bilingual
When the TV set is receiving bilingual program, press the Stereo button to select Dual 1 or Dual 2.
Adjusting the Sound
To adjust the sound:
1
Press MENU. The on-screen menu opens.
2
Press 6
User
Normal
Music
3
Press 6
50
Movie
option. Then use 3
News
OFF
User
OFF
! Sound Mode — Selects the sound mode. You can select:
OFF
. Normal (for normal programs) . Music (for musical programs)
Return
. Movie (for movies)
. User (for user setting sound mode).
Note: You can also press SOUND on the remote control to
0 0 0
select the sound mode.
+6db
! Equalizer — Adjusts the equalizer setting.
0db
! Balance — Adjusts the balance between the left and right audio
channels.
-6db
! Surround — Turns the Surround sound effect on or off.
3K 8K 15K hz
Return ! AVC — (Auto volume control) Turns AVC function on to
equalize the overall volume levels for all channels.
Nicam — Only when you set Nicam to
!
menu, you can enable AUTO/STEREO button on the remote
control to quickly select Nicam mode (see below <NICAM
Broadcast Selection>section). To disable stereo sound
selection, set Nicam to OFF from the menu.
4
To close the menu, press EXIT button.
or 5 to display AUDIO menu, press ENTER to access.
or 5 to highlight an option, press ENTER to access the
4 6 5
ENTER to operate. You can select:
19
. News (for news programs)
Auto through the