Summary of Contents for Wilbur Curtis Company MCD-7
Page 1
IND OUT MORE ON THE WEB WILBURCURTIS.COM MCD-7 & MCD-7G Instructions & Service Information MCD-7G MEASURED COFFEE DISPENSERS WILBUR CURTIS CO., INC. 6913 Acco St., Montebello, CA 90640-5403 USA Phone: 800/421-6150 Fax: 323-837-2410 Technical Service Phone: 800/995-0417 (M-F 5:30A - 4:00P PST) Web Site: www.wilburcurtis.com...
Page 2
4. The next step is to remove the drum and shaft assembly (10). To do this, lay the unit on it's side with the handle 5. Once free, pull the handle through the hole on the right side of the MCD-7 (fig 4.) and lift out the drum and shaft.
Page 3
ILLUSTRATED PARTS LIST hole on the right side of the MCD-7. Slide the side plate through the handle and align the screw holes. Rotate the handle so that it is pointing down. Reaching in from the top, push the end of the spring though the side hole on the spring retainer (7).
Page 4
WARRANTY We hereby certify that the products manufactured by the Wilbur Curtis Company, Inc., are, to thebest of our knowledge, free from all defects and faulty workmanship. The following warranties and conditions are applicable: • 90 Days for Labor and 1 Year Parts from Date of Purchase from Factory: This warranty covers all electrical parts, fittings and tubing. •...
Need help?
Do you have a question about the MCD-7 and is the answer not in the manual?
Questions and answers