Table of Contents
Advertisement
1. INTRODUCTION
Wood stoves provide a comfortable and easy-to-use. These heating units combine
pleasure with a fireplace view. It is an independent heating unit.
The stove body is made of steel and the food heating chamber is made of Teflon or
enamel coating.
The ashtray is placed at the bottom of the product and a fire chamber is available.
Chimney output is placed on the upper plate of the product.
The product is highly efficient due to its physical structure.
It has an automatic ash discharge system.
There is an easy replaceable grid system.
You have a wood stove with European Standards Quality Certificate.
Please read the user manual, carefully. It includes information on product
functions and easy-to-use information.
Use of these information increases the product quality and extend its life. You can
properly protect the fuel and the environment.
Warranty of the product depends on the right use of installation and instructions
as described in the guide.
We recommend you to keep this guide in order to reach the information about the
correct use of the stove at the beginning of every winter.
2. GENERAL INFORMATION
National Standards, European Standards, local regulations, construction
regulations, fire protection and safety regulations must be observed.
During the installation, one must contact a person who is authorized for the
chimney. The authorized person shall check the shape of the chimney connection
of the product in the prescribed directions. In addition, the product installation
and installation connection must be made by an authorized person. Before
installing the stove, the lifting capacity of the installation ground should be
checked whether it is resistant for the stove. In case of insufficient load resistance
or low lifting capacity, suitable precautions must be taken (eg put a stove lifting
plate).
3
Advertisement
Table of Contents
