Advertisement
PAINTING THE GRILLE
We recommend painting your grille prior to installation. If you
decide to paint it in the future, it's best to remove the grille by
simply detaching it from the speaker. Do not paint the grille
while it's installed on the speaker.
Before painting, be sure to remove the cloth material from
beneath the grille. Once painted, place the cloth back to its
position beneath the grille.
SPEAKER SPECIFICATIONS
Woofer:
Tweeter:
Woofer/Tweeter Bridge
Contour Switches
Power Handling:
Frequency Response:
Impedance:
Sensitivity:
Grille:
Diameter x Depth:
Ceiling Cut Out:
Woofer:
Tweeter:
Woofer/Tweeter Bridge
Power Handling:
Frequency Response:
Impedance:
Sensitivity:
Grille:
Diameter x Depth:
Ceiling Cut Out:
Features and specifications are subject to change without notice.
C871
8" Kevlar® Cone
1" Pivoting Aluminum Dome
Fixed at 15˚ Angle
±3dB Bass & Treble
175 Watts
28Hz - 22kHz
8Ω
92dB 1W/1m
Thin-Bezel held by Neo Magnets Thin-Bezel held by Neo Magnets
111/8" x 57/8"
93/4"
C661
61/2" Graphite Cone
1" Pivoting Aluminum Dome
Fixed at 15˚ Angle
125 Watts
36Hz - 22kHz
8Ω
92dB 1W/1m
Thin-Bezel held by Neo Magnets Thin-Bezel held by Neo Magnets
91/4" x 49/16"
81/4"
DWG • 516-933-4900 • dwgdistribution.com
When painting, be careful not to clog the holes of the grille.
The sound of the speaker will be dramatically reduced if the
perforations in the grille are covered in paint.
Proficient recommends only light spray painting using five
parts thinning agent to one part paint.
C841
8" Graphite Cone
1" Pivoting Silk Dome
Fixed at 15˚ Angle
±3dB Bass & Treble
150 Watts
40Hz - 22kHz
8Ω
92dB 1W/1m
111/8" x 57/8"
93/4"
C656
61/2" Graphite Cone
1" Pivoting Silk Dome
Fixed at 15˚ Angle
100 Watts
45Hz - 20kHz
8Ω
91dB 1W/1m
91/4" x 5"
81/4"
3
C651
61/2" Polypropylene Cone
1" Pivoting Silk Dome
Fixed at 15˚ Angle
100 watts
45Hz - 20kHz
8Ω
91dB 1W/1m
Thin-Bezel held by Neo Magnets
91/4" x 49/16"
81/4"
Advertisement
