Rehinging Of Doors - LG GC-B409SLQL Owner's Manual

REHINGING OF DOORS

REHINGING OF DOORS
The refrigerator is designed so that the doors
can be opened right or left depending on the
layout of your kitchen.
CAUTION!
1. Prior to hinging the door to the opposite
side, first of all unload the refrigerator from
foodstuffs and remove all unsecured
accessories (shelves and drawers) from it.
2. To tighten and loose bolts, use a socket
wrench or a box wrench for 10 mm.
3. Do not lay the refrigerator onto the floor.
4. Take care to exclude dropping of the door
in the process of disassembly or assembly.
1.
Unscrew the screw
cover to remove the hinge cover
1
disconnect the connection cable
(only for models with an external display).
Unscrew the bolts
3
hinge and carefully remove the door
4
from the middle hinge
Remove the blank
8
1
4
8
A
Remove the upper door cover
2.
(only for models with an external display),
pull out the cable
5
hole on the opposite side of the door.
Install the upper door cover
of the upper hinge
2
and
1
5
fixing the upper
.
18
.
For external
2
display
3
5
7
and install it to the
into place.
7
Remove the plastic bushing
door of the refrigeration compartment
Unscrew the screw
door of the refrigerator and move the door
stop to the opposite side. Tighten the
9
screw . Move the plastic bushings
10
and (only for models with an internal
14
display) to the opposite side.
7
A
3. (Only for models with an external display).
Using a flat screwdriver, push and separate
the caps from the front panel
12
and unscrew the screws
panel , move the cable
11
opposite side. After installation of the
panel into place, tighten the screws
11
and close their heads with the caps
8
4. Unscrew the bolts
remove the middle hinge and raise the door
of the freezing compartment
the door. Remove the blank
it instead of the removed middle hinge
19
from the
6
.
А
located above the
10
6
14
5
9
10
6
11
, remove the
13
to the
15
13
.
12
15
11
12
13
of the middle hinge,
17
to remove
B
and install
18
.