OPERATION Description 1. standard burner 2. rapid burner 3. simmer burner 4. wok burner 5. pan support 6. glass top or stainless steel drip tray 7. wok selector ring 8. control knob Top view of appliance Ignition and adjustment 1. zone indication 2.
Page 4
OPERATION Pans • Always ensure than the flames stay under the pan. A lot of energy is lost if flames burn around the pan. The handles may also become too hot. • Do not use pans with a base diameter smaller than 12 cm. Smaller pans are not as stable.
MAINTENANCE Burner Use the leads (1) to put together the burner parts. Wok burner Place the wok burner correctly. Placing the wok burner parts incorrectly can result in a poorly functioning burner. 1. Place the burner distributor (2) in the burner housing (1). 2.
Page 6
Some wok burner parts are made from brass. It is normal for the brass colour to change as a result of the high temperatures involved in wok use. Consult the www.asko.com website for additional maintenance and cleaning instructions! Apparatet kan opbevares i 2 år ved omgivelsestemperaturer på...
Fault list If your gas hob does not work properly, this does not always mean that it is defective. Try to deal with the problem yourself first by checking the points below or check the www.asko.com website for more information. SYMPTOM...
Page 8
ERRORS SYMPTOM POSSIBLE CAUSE SOLUTION Timer indicates There is an object, water or Ensure that there is nothing on the buttons. error code F0 – F6 dirt on the buttons. Button Ensure that the buttons are clean and there is (if present).
ENVIRONMENTAL CONSIDERATIONS Disposal of the appliance and packaging Sustainable materials have been used during manufacture of this appliance. The appliance packaging is recyclable. The following may have been used: • cardboard; • paper; • polyethylene film (PE); • CFC-free polystyrene (PS-rigid foam); •...
Need help?
Do you have a question about the HG8BDE1A and is the answer not in the manual?
Questions and answers