Cycle Settings - Whirlpool W10254493A Use And Care Manual

Front-loading automatic washer
Hide thumbs Also See for W10254493A:
Table of Contents

Advertisement

Available languages

Available languages

CYCLE GUIDE — SPECIAL-PURPOSE CYCLES
Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle that best fits the
load being washed.
Not all cycles and options are available on all models.
For best performance, not all settings are available with each cycle, and some options cannot be used together.
Items to wash
Cycle:
using default

cycle settings:

Swimwear, items
Rinse/Drain
that need rinsing only
& Spin
Wet load of clothes
Rinse/Drain
& Spin
Small loads of 3–4
Quick Wash
lightly soiled garments
Jeans and denims
Jeans
(on some models)
No clothes in washer
Clean Washer
with affresh
* All temperature selections feature a Cold rinse, except Warm*, which features a warm wash and a warm rinse.
Load Size Recommendations
For best results, follow the load size recommendations noted for each cycle.
Small load: Fill the washer drum with 3-4 items, not more than 1/4 full.
Medium load: Fill the washer drum up to about 1/2 full.
Large load: Fill the washer drum up to about 3/4 full.
Extra-large load: Fill the washer drum, but make sure clothes can tumble freely.
For best results, avoid packing tightly.
Wash
Spin
Temperature*:
Speed:
Extra High
Warm*
Warm
High
Cold
Medium
Low
No Spin
Extra High
N/A
High
Medium
Low
Hot
Extra High
Warm
High
Cold
Medium
Low
Warm
Medium
Cold
Low
No Spin
®
Soil
Available
Level:
Options:
Extra Rinse
N/A
FanFresh
®
Delay Start
N/A
FanFresh
®
Heavy
Extra Rinse
Normal
FanFresh
®
Light
Delay Start
Heavy
Extra Rinse
Normal
Presoak
Light
FanFresh
®
Delay Start
Cycle Details:
This cycle adds water, then uses
high-speed tumbling and an extra
high-speed spin. For some fabrics,
you may wish to set the spin speed
to a lower setting.
Use Drain & Spin to remove excess
water from the load by choosing
Rinse/Drain & Spin and turning off
Extra Rinse. Spin speed can be set
to a lower setting.
For small loads (3–4 items) needed
quickly. This cycle combines
high-speed tumbling, a shortened
wash time, and a high-speed spin
for reduced drying times.
Cycle combines low-speed
tumbling and medium-speed spins
to provide gentle care for jeans and
denims.
Use this cycle every 30 washes to
keep the inside of your washer fresh
and clean. This cycle uses a higher
water level. Use with affresh
®
Washer Cleaner tablet or liquid
chlorine bleach to thoroughly clean
the inside of your washer. This cycle
should not be interrupted. See
"Washer Care."
IMPORTANT: Do not place
garments or other items in the
washer during the Clean Washer
with affresh
cycle. Use this cycle
®
with an empty wash tub.
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents