Table of Contents
Advertisement
Note: If the background color is red, the sensor cannot detect your head movement.
Use smart pointer
When smart pointer is enabled, you can move the pointer between screens by simply moving your head.
Step 1.
Connect an external display and set project mode to Extend.
Note: Smart pointer does not work in duplicate mode.
Step 2.
Turn on Smart Pointer on the console of Glance by Mirametrix.
Step 3.
Move your head sideways to move the pointer between displays.
Use snap window
When snap window is enabled, you can move application windows between screens.
Step 1.
Connect an external display and set project mode to Extend.
Note: Snap window does not work in duplicate mode.
Step 2.
Turn on Snap Window on the console of Glance by Mirametrix.
Step 3.
Display the application window and make sure it is not maximized or minimized.
Note: Maximized or minimized windows cannot be moved.
Step 4.
Holding down the title of the window, move your head sideways to move the application window.
Manage power
Use the information in this section to achieve the best balance between performance and power efficiency.
Check the battery status
The battery status icon
the current power plan, and access battery settings quickly.
Click the battery status icon to display the percentage of battery power remaining and change the power
mode. A warning message is displayed when the battery is low.
Charge the battery
When the battery power is low, charge your battery by connecting your computer to ac power.
The battery is fully charged in about four to eight hours. The actual charging time depends on the battery
size, the physical environment, and whether you are using the computer.
Battery charging is also affected by its temperature. The recommended temperature range for charging the
battery is between 10°C (50°F) and 35°C (95°F).
Note: To maximize the life of the battery, the computer does not start recharging the battery if the remaining
power is greater than 95%.
Check the battery temperature
1. Open Lenovo Vantage.
2. Click Hardware Settings
3. Locate the Power Status section and then click Show Details to view the battery temperature.
or
is in the Windows notification area. You can check the battery status, view
Power.
.
Chapter 3
Explore your computer
19
Advertisement
Table of Contents
