Table of Contents
Advertisement
66
231E1 LCD
The test standard condition :Brightness control is at 100 contrast control is at 50
8.13
Distance between TFT LCD monitor and CRT/TFT monitor
Conducted with different modes or frequencies. No interference in a distance down to 25 cm.
9.
ENVIRONMENT
9.1
Environmental characteristics
The following sections define the interference and susceptibility condition limits that might occur between external
environment and the display device.
Operating:
- Temperature : 5°C to 40°C
- Humidity
- Altitude
Storage:
- Temperature
- Humidity
- Altitude
Note: recommend at 5 to 35qC, Humidity less than 60 %
10.
REGULATORY STANDARDS
Note: All certificates must be raised under the name of Philips
10.1
Safety approvals
;
CB report
;
CE
10.2
Power management
;
Energy Star
10.3
Certificates, Reports for the production start
When the first production of the monitor starts the following documents must be sent to Philips by mail. All reports
must be raised under "Philips" and have to show W0ZR model name .
;CB report
;CE
;FCC
;Service manual
11
RELIABILITY
11.1
Reliability of the monitor
The MTBF of the monitor has to be greater than 50.000 hours.
12.
CUSTOMIZATION
12.1
Identity Customization
Refer to SKU
12.2
EAN /SAP Identification
(EE)
: 20% to 80%
: 0 to 5000 M
: -20 to 60 degree C
: 10% to 80%
: 0 to 12000M
(Safety)
(EE)
(PM)
Advertisement
Table of Contents
