Belkin F5D7230-4 User Manual page 42

Wireless Broadband Router User Manual
decryption will fail. To ensure successful decryption, have your
wireless stations set identical key tables.
Note: All Wireless Stations must use identical encryption algorithm
level and Key values (same key position in its key table) to ensure
successful data transmission.
υ
Access Control
MAC Address Access Control: The device also supports
authentication based on the MAC address of a wireless client. If
this function is enabled, the AP will allow association by a client
only if that client's MAC address matches an address in the Allow
List.
To enable this function, select the Enable option and then
manually key in MAC address in the Allow List. Up to 16 MAC
entries are allowed.
υ
Advanced Configuration
We suggest you not to modify the Advanced parameters unless
specific requirement is required. The parameters are described as
below:
Beacon Interval: Defines the periodic interval at which the 802.11
WLAN Access Point sends out a beacon.
RTS Threshold: Request to send threshold. It specifies the packet
size beyond which the AP invokes its RTS/CTS mechanism.
Packets that exceed the specified RTS threshold trigger the
RTS/CTS mechanism.
Fragment Threshold: It determines whether packets will be
fragmented and at what size. On an 802.11 wireless LAN, packets
exceed the fragmentation threshold are fragmented, i.e., split into,
smaller units suitable for the circuit size. On the other hand,
packets smaller than the specified fragmentation threshold value
are not fragmented.
DTIM: Specifies the Deferred Traffic Indicator Map (DTIM) period.
This value determines at which interval the AP will send the next
34