TABLE OF CONTENTS CONTENTS PAGE Safety Precautions..........................3-4 Installation ..............................4 Operation ..............................5-6 Auto Oiler ..............................7 Maintenance .............................. 7 Warranty ..............................7 Troubleshooting ............................8 READ CAREFULLY BEFORE USING Proper care of your new shredder will ensure many years of trouble free operation, with minimum of maintenance or repair.
• The mains socket must be grounded and easily accessible at all times! • Use only the power cord supplied with the device by Dahle and ensure that it is not damaged! • Ensure that the building installation has short-circuit protection: max. 16 A (US max.
IMPORTANT SAFETY PRECAUTIONS It is obligatory to follow the safety instructions! Read the operating instructions carefully before using the shredder! This shredder is not intended to be used by children (the product is not a toy)! Do not touch the feed opening with your hands! Do not allow items of clothing to touch the feed opening! Do not allow your hair to touch the feed opening! Prior to maintenance work, disconnect the shredder from the power supply!
OPERATION POWER ON • Turn the key on the main power switch ON. AUTO START/STOP • Press the START button. The AUTO LED will illuminate indicating the shredder is ready for use. • When in AUTO mode, the shredder will start and stop automatically when shredding. •...
Page 6
OPERATION CLEANING • From the STOP mode, push and hold the reverse (REV) button for five seconds. The machine will cycle through a one-minute cleaning mode and then automatically STOP. It is recommended to activate CLEANING mode monthly, or every time the waste container is emptied.
WARRANTY Dahle guarantees it’s industrial shredders to be free from manufacturing defects (ma- terials / workmanship) for a period of one year. Dahle offers a one year guarantee on the cutting cylinders. This warranty shall not apply to wearable items or defects caused by ordinary wear and tear, insufficient maintenance or improper operation.
TROUBLESHOOTING Easy check points before you report malfunction. Symptoms Check Point 1. The paper shredder is not - Check the power plug working. - Check the voltage of the outlet (AC 120V or 220V it depends on your countryís 2. Auto LED light is off voltage rate) - Check the breaker switch which is located behind Confirmation...
Page 10
Version 4/2019 Dahle North America, Inc. 49 Vose Farm Road Peterborough, NH 03458 Tel. (800) 995-1379 info@dahle.com www.dahle.com...