Rear Bottom View In Detail - Nexcom APPD 1701T User Manual

Chapter 1: Product Introduction

Rear Bottom View in Detail

USB COM
Touchscreen Connector (USB) (Optional)
This USB connector must be attached to the USB port of the PC. The
touchscreen cable is included in accessory box.
Touchscreen Connector (DB-9) (Optional)
This RS-232 connector must be connected to the RS-232 port of the PC.
RS-232 & USB touchscreen interface does not allow
connection into the system at the same time.
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
DVI-D VGA DC Input
DVI Port (DVI-D)
Connected with a standard DVI connector through I/O port of this unit. Only
supports digital signals.
VGA Port (DB-15)
This DB-15 connector can be connected to the system.
12 – 24V DC Input
Terminal block socket used to plug a DC power cord.
13
APPD 1200T/1205T/1500T/1700T/1900T User Manual