Customers shall enclose the “NEXCOM RMA Service Form” with the ▪ returned packages. Items will be replaced with NEXCOM products if the original one is not ▪ Customers must collect all the information about the problems encoun- able to be repaired. Ex: motherboard, power supply, etc.
VTK 33M-01 Physical Features Item VTK 33M-01 is designed to be a commander of our transportation PC in Metal Stand vehicles or vessels. It connects to our VTC series with only a single cable Audio/Mic Cable that integrates LVDS signal, USB and 12V DC power. Through this con-...
Chapter 1: Product Introduction VTK 33M-01 Hardware Specifications Front Panel ▪ LED (power status) x 1, LED (light sensor On/Off) x 1 The following are the hardware specifications of VTK 33M-01. ▪ Monitor power button LCD Panel ▪ Brightness control ▪...
Chapter 1: Product Introduction Ordering Information Refer to the tables below for the appropriate ordering information of VTK 33M-01. VTK 33M-01 Standard Ordering Information ▪ VTK 33M-01 8.4” (800 x 600) LVDS with Touch Screen ▪ (P/N: 10VK33M0100X00) Sunlight Readable ▪...
Connect and fasten the DVI end of the LVDS cable onto the DVI port. NOTE : Use only NEXCOM’s proprietary LVDS cable for this DVI port. Pin assignments of this DVI port differ from those of the standard DVI interface.
Page 19
: Make sure the power is off for VTC 3300E before connect- ing VTK 33M-01 with VTC 3300E via the LVDS cable. If connection between VTK 33M-01 and VTC 3300E is made while VTC 3300E is already powered on, VTC 3300E will shut down automatically.