Scan Mode - Newland NLS-N7L User Manual

Scan Mode

The N7L provides the following four scan modes:
1. Level mode: Press and hold the scan trigger to start a decode session which continues until the trigger is released.
2. Continuous mode: Press the scan trigger to continuously read barcodes. To suspend or resume scan operation, simply
press the scan trigger.
Scan interval (ms): This parameter sets the timeout between decode sessions.
3. Pulse mode: Press the scan trigger to start a decode session which continues until the decode session timeout expires.
4. Delay mode (Scan on release key): Press and hold the scan trigger to aim at barcode then release it to start a decode
session which continues until the decode session timeout expires or a barcode is decoded. It is advised to use this scan
mode and the Central Area Decoding feature to ensure that only the desired barcodes are read if multiple barcodes are
placed closely together.
Decode session timeout (ms): This parameter sets the maximum time decode session continues during a scan attempt.
Masked repeat interval (ms): This parameter sets the time interval between two successive reads on the same barcode.
41