Entering A Password; Digital Output - Panasonic DVD-LV50 Operating Instructions Manual

Changing settings
TOP MENU
ENTER
Numbered
buttons

Entering a password

Remote control only
[DVD-V]
The password screen is shown when you select
levels 0 to 7.
1. Input a 4-digit password with the numbered
buttons and press [ENTER].
1. ≥If you enter a wrong number, press
[CANCEL] to erase it before you press
[ENTER].
1. ≥The lock symbol appears closed to show the
rating is locked.
1. ≥Do not forget your password.
2. Press [ENTER] to confirm the 4 digits.
Now, when you insert a DVD-Video that
exceeds the ratings limit you set, a message
appears on the screen.
Follow the on-screen instructions.
28
SETUP PLAY MODE
ANGLE
∫ ; 1
SUBTITLE
DISPLAY
AUDIO
ENTER
A.SRD
MENU RETURN
CANCEL
CANCEL
1 2 3
4 5 6
S10
7 8 9 0
6 5 : 9

Digital output

[DVD-V]
Change these settings
connected digital equipment.
PCM Down Conversion
Select how to output audio with a sampling
frequency of 96 kHz.
Select "Yes" if the equipment you connect cannot
process signals with a sampling frequency of
96 kHz.
≥Select "No" if you use analogue connection,
irrespective of the type of equipment.
No (Factory preset):
Output as 96 kHz. There is no output if the disc
has copy protection. Select "Yes" in this case.
Yes:
Converted to 48 kHz for output.
Dolby Digital and DTS Digital
Surround
Bitstream (Factory preset for Dolby Digital):
Select if the equipment can decode the signal.
PCM (Factory preset for DTS Digital Surround):
Select if the equipment cannot decode the
signal.
IMPORTANT
If the equipment cannot decode the signal,
the setting must be changed to PCM. If not,
signals the equipment cannot process will be
output, causing high levels of noise which
can damage your hearing and the speakers.
when you have