Changing The Monitor Settings; Adjusting Color Intensity; Changing The Size Of The Picture; Adjusting The Brightness - Panasonic DVD-LV50 Operating Instructions Manual

Changing the monitor settings

Í indicator
[RAM] [DVD-V] [VCD]

Adjusting color intensity

1
Press [COLOUR].
2
Use [2, 1] to adjust the color
shade.
j5: light()5: dark
3
Press [COLOUR] to clear the
display.
Mode
Software
Widescreen
4:3
4:3,
(Letterbox)
22
MONITOR
BRIGHT
COLOUR
2,1
NORMAL
Full screen
Te quiero
Black bands on the
right and left.
Te quiero
Black frame.
Te quiero
Te quiero
Changing the size of the
picture
Press [MONITOR].
Each time you press the button:
NORMAL-------------)FULL ---------------]
^-OFF (no picture)<ZOOM(--}
The picture mode and size
The picture shown on the LCD depends on the
mode and the size recorded on the disc
( below).
≥If you are not using the LCD on this unit, select
"OFF" (no picture) to conserve power.
≥(The [Í] indicator flashes.).
≥The LCD turns off if you close it.
≥Horizontal lines may appear in the picture
when the mode is switched to"ZOOM", but
this is not an indication of malfunction.

Adjusting the brightness

1
Press [BRIGHT].
2
Use [2, 1] to adjust the
brightness.
j5: dark()5: light
Power consumption increases with the
level of brightness.
3
Press [BRIGHT] to clear the
display.
Note
These changes are effective only for this unit's
LCD. Make changes to the television's settings if
you have connected one.
FULL
Full screen
Te quiero
Stretched horizontally.
Te quiero
Stretched horizontally.
Te quiero
ZOOM
Top and bottom cut off.
Te quiero
Top and bottom cut off.
Te quiero
Full screen
Te quiero