Panasonic SC-HT800V Operating Instructions Manual page 39

To check, correct, and cancel timer programs
∫ To check a program
1 Press [PROG].
The timer-programming screen appears.
∫ To correct a program
While the timer programming screen is on the television,
1 Press [PROG] to highlight the program you want to correct and
press [ENTER].
2 Select the item with [2, 1] and correct it with [3, 4].
DATE CH
1 27WE 2
2 SU-SA 125
3 SU 14
4
19TU 5
5
28TH AV
6
30SA 4
7
– – – – – –
8
– – – – – –
SELECT :
2 1
∫ To cancel a program
While the timer programming screen is on the television,
1 Press [PROG] to highlight the program you want to cancel.
2 Press [CANCEL].
To clear the timer programming screen
Press [MENU].
Auto SP/EP change
The unit switches tape speed to EP if it determines there is not
enough tape to record the entire program in SP mode. The change
may start at the beginning of the recording or part way through,
depending on the remaining tape.
Before using this function, set the length of the tape you are using
(➡ page 44). It may not work correctly if you use tapes with irregular
lengths.
Example program combination
1st program
(30 min.)
Example program combination
15 min.
30 min. at SP
at SP
[Note]
This function does not guarantee recording of the entire program.
ON OFF 1/2
8:02PM 9:30PM SP
10:30AM 11:00AM A
3:00PM 4:00PM EP
10:15PM 11:30PM VP
8:02PM 9:30PM SP
7:10PM 7:55PM VP
–:– – –:– –
–:– – –:– –
s/r:
4 3
2nd program (60 min.)
(when using a 60-min.
45 min.
at EP tape)
[Remember]
Press [VCR] first.
RQT6951
39