Version 3.4.51; Version 3.4.50 - HIKVISION HI-DS-7316HUHI-F4N User Manual

(Chapter 3.4 Adjusting Live View Settings, Chapter 17.1 Configuring General Settings, Chapter
17.4 Configuring More Settings, )
For the new models, if the sum of the analog and IP channels exceeds 25, up to 32-window

division mode is supported for the VGA/HDMI1 output. (Chapter 3.4 Adjusting Live View
Settings)
For the new models, IP cameras up to 8MP resolution can be connected. The max.

connectable IP cameras vary with different models. Disabling one analog channel will add one
IP channel. (Chapter 2.3.2 Using the Wizard for Basic Configuration, Chapter 2.6 Configuring
the Signal Input Channel)
The new models can connect the IP camera supporting H.265. You can also enable H.265+ for

the connected IP camera supporting H.265. And the encoding type information of the IP
camera will change on the left-click menu. (Chapter 2.3.2 Using the Wizard for Basic
Configuration, Chapter 2.5.2 Adding the Online IP Camera, Chapter 3.2.3 Quick Setting Toolbar
in Live View Mode, Chapter 5.1 Configuring Encoding Parameters)
For the new models, RAID and disk clone is supported. Hot-swappable HDD is supported.

(Chapter 13 RAID, Chapter 14.6 Configuring Disk Clone)
For the new models, there are 2 self-adaptive 10M/100M/1000M network interfaces and only

multi-address and network fault tolerance working modes are configurable. (Chapter 2.3.2
Using the Wizard for Basic Configuration, Chapter 12.1 Configuring General Settings)

18.4.6 Version 3.4.51

Added:
Add the new models: DS-7604HUHI-F1/N, DS-7608HUHI-F2/N and DS-7616HUHI-F2/N. (Chapter

17.1 Specifications)

18.4.7 Version 3.4.50

Added:
Add the new model: DS-7216HUHI-F2/N. (Chapter 17.1 Specifications)

For DS-7200HUHI-F/N series, the default HDTVI/CVBS signal input type also supports the auto

detection of 3MP signal. (Chapter 5.1 Configuring Encoding Parameters)
Support the switching of signal input types including HDTVI/CVBS, AHD and IP signal for

DS-7200HUHI-F/N series DVR. (Chapter 2.1 Configuring the Signal Input Channel, Chapter 2.6
Configuring the Signal Input Channel)
The IP channels will not be displayed on the signal input interface and you can view the max.

IP camera accessible numbers in the Max. IP Cameras Access text field. (Chapter 2.1
Configuring the Signal Input Channel, Chapter 2.6 Configuring the Signal Input Channel)
Digital Video Recorder User Manual
324