Configuring Playback Settings For Different Playback Sources Configuring The Speaker Settings; Setting Your Speaker System; Setting The Size Of The Front Speakers - Yamaha RX-V685BL Owner's Manual

Configuring the speaker settings

Setting your speaker system

Select the setting according to the speakers that are connected.
Setup menu
"Speaker" > "Power Amp Assign"
Settings
Select this option when you use a normal speaker system (not using
Basic
Zone2 speakers or a bi-amp connection).
Select this option when you use Zone2 speakers in addition to the 7.1
7.1 +1Zone
system in the main zone.
Select this option when you use Zone2 speakers in addition to the 5.1.2
5.1.2 +1Zone
system in the main zone.
Select this option when you connect speakers that support bi-amp
5.1 BI-Amp
connections.
NOTE
For details on the speaker system, see the following:
▪ "Connecting front speakers that support bi-amp connections" (p.28)
▪ "Connecting Zone2 speakers using the unit's internal amplifier" (p.51)

Setting the size of the front speakers

Selects the setting according to the size of your front speakers.
Setup menu
"Speaker" > "Configuration" > "Front"
Settings
Select this option for small speakers.
Small
The subwoofer will produce front channel low-frequency components
(configurable in "Crossover").
Select this option for large speakers.
Large
The front speakers will produce all of the front channel frequency
components.
NOTE
▪ When configuring the speaker size, as a general guideline, select "Large" if the woofer diameter of your
speaker is 16 cm (6‑1/4") or larger, or "Small" if it is smaller than 16 cm (6‑1/4").
▪ "Front" is automatically set to "Large" when "Subwoofer" is set to "None". For details on "Subwoofer" in the
"Setup" menu, see the following:
– "Setting the use of a subwoofer" (p.99)
95
En