1. The REMOTE control input requires a voltage between 10VDC and 60VDC referenced to the input ground to enable the output of the converter. Converters ship with a jumper connecting the
REMOTE input and the input positive terminal, which must be removed before the control feature will function.
2. The REMOTE control will disable the converter when the remote terminals connected to the INPUT NEG terminal of the converter. The converter is enabled when the REMOTE terminal is left floating.
Page 2
All models are output-enabled by factory default: blown, replace it only with a fuse of the same rating. issued by ICT. Return of the products to the customer after repair is > For models ICT206012-35AI2, ICT206024-20AI2, completed shall be prepaid by ICT unless otherwise mutually agreed between the parties.
This manual is also suitable for:
Isolated ict1212-12ai2Isolated ict1212-35ai2Isolated ict1224-5ai2Isolated ict1224-10ai2Isolated ict1224-20a12Isolated ict103048-5ai2...
Show all