Removing And Installing The Chassis Top Cover - Gigabyte G492-H80 User Manual

3-1

Removing and Installing the Chassis Top Cover

Before you remove or install the system cover
• Make sure the system is not turned on or connected to AC power.
Follow these instructions to remove/install the chassis top cover:
1. Remove the single screw securing the cover.
2. Loosen the two thumbnail screws securing the top rear cover in place.
3. Slide the cover towards the rear and remove the cover in the direction indicated.
4. Follow steps 1-3 in reverse order to re-install the top cover
System Hardware Installation
3
3
1
- 22 -
2
2