AEG REGINA 1850 User Information page 43

Problem
The wash programme
will not begin after the
START button was
pressed. ATTENTION /
PLEASE CLOSE THE
DOOR is showing in the
display.
The door cannot be
closed.
The washing machine
vibrates when operat-
ing or is not stable.
The main water for the
main wash is producing
too many suds.
Possible cause
The door is not closed prop-
erly.
The child safety device is
engaged.
The transport locks have not
been removed.
The height-adjustable feet
have not been set correctly.
There is very little washing in
the drum (e.g. only one bath-
robe).
Water was not able to be
drained completely before
spinning, because
the outlet hose has a kink in
it or
the drain pump is clogged.
Too much detergent was
probably used.
Remedy
Close the door - there should
be an audible click. Press the
START button.
Disengage the child safety
device (see section "Child
safety device").
Remove the transport locks
as described in the
installation and connection
instructions.
Adjust the feet as described
in the installation and con-
nection instructions.
Operation is not affected by
this.
Check the positioning of the
outlet hose and even out any
kinks if necessary or clean
the drain pump and remove
any foreign matter that may
be in the pump housing.
Follow the manufacturer's
instructions exactly when
measuring out detergent.
43