GE JBP22 JBP60 Owner's Manual And Installation Instructions page 44

Problem
Coil Cooktops
Surface units
not functioning
properly
Oven—All Models
Oven light does not work
Oven will not work
Food does not bake
or roast properly
Possible Causes
The surface units are not
plugged in solidly.
The surface unit controls
improperly set.
The drip pans are not set securely •With the controls off, check to make sure the drip pan is
in the cooktop.
Light bulb is loose or defective.
Switch operating light is broken. •Call for service.
Plug on range is not completely
inserted in the electrical outlet.
A fuse in your home may
be blown or the circuit
breaker tripped.
Oven controls improperly set.
On self-cleaning models, door
left in the locked position.
Oven controls improperly set.
Shelf position is incorrect or the
shelf is not level.
Incorrect cookware or cookware
of improper size being used.
Oven thermostat needs
adjustment.
What To Do
•With the controls off, check to make sure the surface
unit is plugged completely into the receptacle.
•Check to see the correct control is set for the surface
unit you are using.
in the recess in the cooktop and that the opening in the
pan lines up with the receptacle.
•Tighten or replace the bulb.
• Make sure electrical plug is plugged into a live, properly
grounded outlet.
• Replace fuse or reset circuit breaker.
• See the Using the oven section.
• If necessary, allow the oven to cool then unlock the door.
•See the Using the oven section.
• See the Using the oven section.
• See the Using the oven section.
•See the Adjust the oven thermostat–Easy to do yourself!
section.
ge.com
43