Table of Contents
Advertisement
Set-Up & Installation
Do not install this unit over an electrical junction box. Air currents around junction boxes
can prevent smoke from reaching the sensing chamber and prevent the unit from alarming.
Only AC powered units are intended for installation over junction boxes.
NOTE:
Be sure to mount the product in the orientation specified in the next steps as this provides the most
stability for mounting the product to the wall or ceiling. When wall mounting, it is suggested that the horn
opening is in the upper left corner. This alarm is designed to be mounted on the ceiling or wall if necessary.
Ensure the iOS software is updated to iOS 9.3 or later.
Download the free Onelink app from the
Step 1
App Store and follow set-up instructions.
Hold the mounting bracket against the ceiling (or
Step 2
wall) so the two universal mounting holes are aligned
approximately at the 9 and 3 o'clock positions.
(See image). Trace around the holes with a pencil.
Put the unit where it won't get covered with
Step 3
dust when you drill the mounting holes.
Using a 3/16" (5 mm) drill bit, drill a hole through
Step 4
the center of the outlines you traced.
Insert the plastic screw anchors (in the plastic
Step 5
bag with screws) into the holes. Tap the screw
anchors gently with a hammer, if necessary,
until they are flush with the ceiling or wall.
Install the screws but do not tighten completely. Attach the mounting bracket by aligning
Step 6
the screws in the open portion of the universal mounting slots and rotating the bracket into
place. Tighten the screws until they are snug to secure the bracket. Do not over tighten.
Mount alarm to mounting bracket to activate the alarm.
Step 7
NOTE:
After you activate the Alarm, the Color Indicator Ring will power up and the Alarm will
welcome you. To program your alarm, follow the instructions provided in the Onelink app.
WARNING:
!
recommended to use with a 802.11 b/g/n router. The notifications are only as reliable as your
Wireless network and are not a substitute for a third party emergency monitoring service.
iOS device notifications require a functional Wireless connection. For best results,
Speaker
Opening
9
Advertisement
Table of Contents
