Panasonic WJ-NX200K Important Information Manual page 17

Major operating controls and their functions
⑨ Network port (PC port) [PC]
Connect the recorder with a PC via a network compati-
ble with 10BASE-T, 100BASE-TX or 1000BASE-T. Use
this port when the cameras and the PC are connected
to different network.
⑩ Network port (Camera/PC port) [CAMERA/PC]
Connect the recorder with a PC and cameras via a
network compatible with 10BASE-T, 100BASE-TX or
1000BASE-T. When the port is being accessed, the
access indicator (green) blinks. When the port is being
linked, the link indicator (orange) lights.
PC
LAN (10/100/1000 BASE-T)
Access indicator
⑪ Audio output connector (RCA pin jack)
[AUDIO OUT]
Connect such device as a powered speaker. Same
audio output to the main monitor will be output from this
connector.
⑫ Video output connector (BNC) [VIDEO OUT]
Connect a sub monitor (BNC) to this connector. Same
images output from the sub monitor output connector
(HDMI) will be output from this connector.
The default is NTSC output. The setup menu will not be
displayed.
⑬ Main monitor output connector (HDMI)
[A/V OUT MAIN]
This connector is used to connect to an HDMI-ready
monitor (the main monitor). It displays live images,
recorded images, or the setup menu of the recorder.
⑭ Sub monitor output connecter (HDMI)
[VIDEO OUT SUB]
This connector is used to connect to an HDMI-ready
monitor (sub monitor). Only the live images will be dis-
played.
⑮ Security wire hole
Mount the lock device for the anti-theft security wire.
Camera/PC
Link indicator
(continued)
How to use the cable clamp (for
fixing the terminal block cables)
Cable clamp
①
① P ass the cable clamp (provided) through the clamp
mount.
②
②Tie the cables of the ALARM/CONTROL terminals and
fix with the cable clamp.
17
Clamp mount