Janome 9200D Instruction Book page 19

10
2
3
34
(1)
10
(2)
1
10. Pull the threader to pass the thread through the
hole of lower looper thread guide (4).
Remove the thread from the threader, and draw
the thread through the hole on the lower looper
10 cm (4˝) or more with a pair of tweezers.
For threading without the looper threader, draw
*
the thread from the right side of lower looper
thread guide (4) with a pair of tweezers.
And draw the thread through the hole on the
*
lower looper 10 cm (4˝) or more with a pair of
tweezers.
10
Lower looper
(1) Looper threader
(2) Tweezers
NOTE: How to thread woolly nylon/polyester thread.
The illustration at left shows one of the easiest
*
ways to pass woolly nylon/polyester thread
through the lower looper.
1
Lower looper
2
Ordinary thread
3
Woolly nylon/polyester thread