Advertisement
Quick Links
Advertisement
Related Manuals for Quaildigital Q-P7BS
Summary of Contents for Quaildigital Q-P7BS
- Page 1 User guide PRO7 HEADSET SYSTEM...
- Page 2 These installation instructions are aimed at a person with a reasonable level of technical competence and familiar with the safety precautions relevant to the use of electrical and electronic equipment. You should not attempt to install this system without the relevant level of expertise. This system operates with a 48v DC power supply.
-
Page 3: Table Of Contents
Contents Installing the system Positioning the charger Registering and using headsets Frequently asked questions Product specification Troubleshooter... -
Page 4: Installing The System
Installing the system The Base Station (Base) is a license-free DECT wireless transceiver using a 48v DC external power supply. The system can be expanded with multiple Bases, up to a maximum of 20, in a closed communications network linked by Cat5 cable. The typical range of the Base is up to 50 metres internally and up to 100 metres in open spaces. - Page 5 If you plan to mount the Base higher than 2m above floor level consider installing a Registration Button - it should be wall- Base mounted underneath the Base so you can see the Base LEDs during the registration process. Registration The Registration Button is used to activate Button the registration process (press for 5...
- Page 6 Rules when installing multiple Bases on the same network • Ideal height for Bases is between 2 and 4 metres above floor level. • The maximum cable length between any two Bases should not exceed 100m. • The maximum cable length between two power sources should not exceed 200m.
- Page 7 The two LEDs on the front of the Base indicate its status, as below: POWER LED STATUS LED Booting up Synchronization signal receiving OK Base is master and ready Active call or calls on this Base is slave and ready Base BOTH LEDs FLASHING CORRECTIVE ACTION...
-
Page 8: Positioning The Charger
Positioning the charger The Headset Charger should be positioned on a worktop or wall-mounted Headset Charger Shelf (Q-P7SHELF) and plugged into a socket that is a constant 24hr power outlet. The charger should be located within range of a Base so that headsets remain active at all times. Return headsets to the charger when not in use. -
Page 9: Registering And Using Headsets
Registering and using headsets Each headset needs to be registered to the system for the first time before use. The system has the capacity for 30 headsets. To register one or more headsets, follow this procedure: Make sure the new headset has a charged battery (blue LED flashes every 5 seconds). - Page 10 Audible tones for different headset status and functions: STATUS TONE Registration mode 1 beep every second Out of range 2 beeps every 10 seconds Battery low 3 beeps every 60 seconds Registration complete 1 long beep (3 seconds) Busy tone 3 long beeps Headset not registered 1 beep every 3 seconds...
-
Page 11: Frequently Asked Questions
Frequently asked questions Up to 6 people can use No. Anyone else pressing their talk-button will TalkLock at one time. If 6 hear an engaged tone and cannot enter the people are using call. TalkLock, can anyone else speak on the system? How are the 6 speech As soon as the 6th user engages TalkLock they... -
Page 12: Product Specification
Product specifications BASE STATION Q-P7BS Operating frequency 1.88-1.90 GHz EMEA, Asia, 1.910-1.930 GHz North America DECT transmission power 250 mW EMEA, Asia 125 mW North America Headset capacity Up to 30 headsets all listening with a max of 6 simultaneous participants... - Page 13 HEADSET Q-P7HS Operating frequency 1.88-1.90 GHz EMEA, Asia, 1.910-1.930 GHz North America Operating modes TalkLock and PTT as standard Microphone Noise cancelling, electric mic Battery capacity 9 hours PTT, up to 6.5 hours TalkLock, Charge time 2.5 hours to full re-charge Volume control 5-stage, slide button up/down Battery (part number)
-
Page 14: Troubleshooter
Your headset is registered to more than one audio from more than Base, and needs removing from the one you one system. don’t want it used with. See page 7 for procedure. How do I order Contact your service provider or email accessories? sales@quaildigital.com PRO7 HEADSET SYSTEM... - Page 16 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. www.quaildigital.com...