Function Description - ViewSonic PJD5122 User Manual

Function
Color Mode
Reference
Mode
Brightness
Contrast
Color
Tint
Sharpness
Brilliant
Color
Color
Temperature
Save
Settings
Quick Auto
Search
Pre-defined picture modes are provided so you can optimize
your projector image set-up to suit your program type. See
"Selecting a picture mode" on page 29
Selects a picture mode that most suits your need for the image
quality and further fine-tune the image based on the selections
listed on the same page below. See
mode" on page 30 for details.
Adjusts the brightness of the image. See
on page 30 for details.
Adjusts the degree of difference between dark and light in the
image. See "Adjusting Contrast" on page 30
Adjusts the color saturation level -- the amount of each color in a
video image. See "Adjusting Color" on page 31
Adjusts the red and green color tones of the image. See
"Adjusting Tint" on page 31
The function is only available when Video or S-Video with
NTSC system is selected.
Adjusts the image to make it look sharper or softer. See
"Adjusting Sharpness" on page 31
Adjusts white peaking while maintaining correct color
presentation. See "Adjusting Brilliant Color" on page 31
details.
See "Selecting a Color Temperature" on page 31
Saves the settings made for the User 1 or User 2 mode.
See "Switching input signal" on page 24
Description
for details.
"Setting the User 1/User 2
"Adjusting Brightness"
for details.
for details.
for details.
for details.
for details.
for
for details.
Operation 39