Table of Contents
Advertisement
Setting items
Network Setting
IPv4 Setting
IPv6 Information
Description
When "Zone" is selected: Select the position to adjust with the </, button for the horizontal
position (H Position) and the M/m button for the vertical position (V Position), then press
Set the amount to adjust with the </, button for the horizontal direction (H) and with the M/m
button for the vertical direction (V). You can select the position to adjust again by pressing
Reset: Returns to the factory settings.
Preset: The optimized data has been preset.
Note
Depending on the adjustments made above, colors may become uneven or the resolution may change.
Perform internet protocol settings.
IP Address Setup: Selects the IP address setting method.
Auto(DHCP): The IP address is assigned automatically from the DHCP server such as a router.
Manual: Specifies the IP address manually.
When "Manual" is selected for "IP Address Setup," input "IP Address," "Subnet Mask," and "Default
Gateway." Select each item with the M/m button, then press
</, button and input the value with the M/m button. When all items are entered, select "Apply," and then
press the
button. The entered settings will be registered.
IP Address: Sets the unit's IP address.
Subnet Mask: Sets the unit's subnet mask.
Default Gateway: Sets the unit's default gateway.
MAC Address: Displays the unit's MAC address. This cannot be changed.
Apply: Enables the IP address that is set manually.
Displays the IPv6 information.
When you set the IPv6 IP address, set it on a Web browser (page 33).
button. Select the frame to input with the
31
.
.
Advertisement
Table of Contents
