Table of Contents
Advertisement
Setting items
Color Temp.
[COLOR TEMP]
Sharpness
[SHARPNESS]
Expert Setting
NR (Noise Reduction)
MPEG NR (MPEG Noise
Reduction)
Smooth Gradation
Film Mode
Description
Adjusts the color temperature.
D93: Equivalent to 9,300 K color temperature normally used in TVs. Gives white colors a blue tint.
D75: Equivalent to 7,500 K color temperature used as an ancillary standard illuminant. Gives a neutral
tint between "D93" and "D65."
D65: Equivalent to 6,500 K color temperature used as a standard illuminant. Gives white colors a red
tint.
D55: Equivalent to 5,500 K color temperature used as an ancillary standard illuminant. Gives white
colors an even redder tint.
Custom 1 to 5: Enables you to adjust, set, and store your favorite color temperature.
The factory default settings are as follows.
Custom 1: Same as the "D93" color temperature setting.
Custom 2: Same as the "D75" color temperature setting.
Custom 3: Same as the "D65" color temperature setting.
Custom 4: Same as the "D55" color temperature setting.
Custom 5: Setting that prioritizes brightness.
Tip
You can adjust each item to a color temperature according to your preference.
Sharpens the outline of the picture, or reduces the noise.
The higher the setting, the sharper the picture. The lower the setting, the softer the picture, thus reducing
the noise.
You can make adjustments by pressing the SHARPNESS +/- button on the remote control.
Reduces the roughness or noise of the picture.
Auto: Detects the noise level to reduce the roughness or noise of the picture automatically.
High/Middle/Low: Select a setting according to the roughness or noise of the input signal source.
Off: The NR (noise reduction) function is not applied.
Tip
The noise level may not be detected accurately with "Auto" depending on the input signal source. If the
picture is unacceptable with "Auto," select a setting from among "High," "Middle," "Low" or "Off."
Reduces block noise and mosquito noise, particularly in digital signals.
Auto: Detects the noise level to reduce the block noise and mosquito noise of the picture automatically.
High/Middle/Low: Select a setting according to the block noise and mosquito noise of the input signal
source.
Off: The MPEG NR (MPEG noise reduction) function is not applied.
Tip
The noise level may not be detected accurately with "Auto" depending on the input signal source. If the
picture is unacceptable with "Auto," select a setting from among "High," "Middle," "Low" or "Off."
Smooths the gradation of the flat parts of images.
High/Middle/Low: You can adjust the smooth gradation effect.
Off: The smooth gradation function is not applied.
Tip
This item is not available for 3D signals.
According to the film source you have selected, make a setting for playback.
Auto: Suitable for reproducing the original picture movement. Normally, set this to "Auto."
Off: Plays back the picture in progressive format without detecting video signals automatically.
Tip
This item is compatible with a 1080i signal only.
20
Advertisement
Table of Contents
