Advertisement
5.6.
The lathe (not included) is secured to the stand using the M10x100 bolts (13), Ø10 flat washers (14), Ø10 spring washers (15) and the
m10 hex nuts (16).
6. maIntEnancE
6.1.
Very little maintenance is required, but regular checks should be made to ensure the structural integrity of the stand. The lathe is heavy
and should the stand sustain structural damage, it could collapse/overbalance if not properly repaired/replaced.
6.2.
Periodically check the stand for rust.
6.3.
Occasionally remove the lathe and check the nuts & screws within the stand. Ensure they are all present, intact and tightened.
6.4.
Regularly check the stand for dents, distortion and signs of misuse.
6.5.
For information regarding repairs/replacement contact your authorised Sealey stockist.
6.6.
6.7.
6.8.
6.9.
.
Parts support is available for this product. Please email sales@sealey.co.uk or telephone 01284 757500
EnvIronmEnt protEctIon
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: no liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey Group, Kempson Way, suffolk business park, bury st Edmunds, suffolk. Ip32 7ar
01284 757500
© Jack Sealey limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
SM27ST.V2 | Issue:3 (H,F) 06/06/18
Advertisement
