Table of Contents
Advertisement
Listening to music
from an external
device
1. Connect an external device to the AUX jack with
line input cable.
2. Select a source to AUX.
3. Play the connected Auxiliary Equipment.
4. Rotate the volume knob on the unit to adjust
the volume.
Preventing radical changes in
volume as switching sources
Only when you set AUX to ON as switching sources,
you can adjust the volume level of each source to
prevent radical changes in volume by selecting
GAIN 0 / +3 / +6.
F
1. Press
on the unit.
2. Rotate the volume knob to set the option and
press it. (GAIN 0 / +3 / +6)
3. If you want to return to the previous step, press
.
Listening to the
TUNER
1. Press SRC repeatedly to select a source to
TUNER.
2. Press BAND repeatedly to select a desired band.
3. For manual search, press and hold A / D on
the unit until "MANUAL" is displayed. Then press
it repeatedly to select a desired frequency.
For auto search, press A / D on the unit until
"SEARCH" is displayed. (Except MW)
4. Rotate the volume knob on the unit to adjust
the volume.
Storing desired frequencies
manually
1. Press BAND to select a desired band you want
to store.
2. Select the desired frequency by using A / D on
the unit.
3. Press the volume knob and rotate the volume
knob to select a preset station among 1 to 6
and then press and hold the volume knob until
the beep sound is heard.
Or press and hold one of preset buttons among
1 to 6 on the unit until the beep sound is heard.
4. Repeat steps 1 to 3 to preset other stations.
,
Note
When a station is stored on the preset
numbers on which another station of the same
band has already been preset, the previously
preset station is automatically erased.
Operating
13
3
Advertisement
Table of Contents
