Programming The Remote Control For Other Equipment - ViewSonic LCD TV VS12117-1M User Manual

Using the TV Features

Programming the Remote Control for Other Equipment

Follow the steps below to program your TV's remote control.
1. In the space provided below, write down the three-digit code of your equipment found on
the Manufacturer's Codes List on page 26~33.
If more than one code is listed, try entering the code listed first.
Code No. ___________________________
2. Press and hold "SET" button, and simultaneously press the device button to be set, like
"DVD", "STB", or "AUDIO".
3. Now the LED is on. Release all buttons you pressed.
4. Enter the three-digit code serially using "0"-"9" buttons. If you want to escape from set
mode, please press device button. (If the code is not entered within 10 seconds, you must
repeat step #2.)
5. After three-digit code is pressed, LED is off if the code is correct. If the code does no
exist, LED will flash twice and return to set mode, please go back to step #4.
6. Complete programming.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Button Description
Press this button to turn the power on from standby
14 POWER
mode. Press it again to return to the standby mode.
Press to return to previous channel.
15 LAST
Press to adjust the volume.
16 ▼VOL▲
17 LIGHT Press to lighten the remote control keys.
Press to turn the OSD (On-Screen Display) menu on.
18 MENU
When in OSD menu, press to exit or return to the
previous page.
To select HDMI/ VGA source.
19 HDMI
20 YPbPr To select YPbPr source.
21 SLEEP Press repeatedly to set the off timer. The function is
used to automatically shut off the LCD TV after a
preset period of time passed. There are several times
for choice – Off, 10 Minutes, 20 Minutes, 30 Minutes,
40 Minutes, 50 Minutes, 60 Minutes, 90 Minutes, 120
Minutes.
22 MTS Press this button to choose the available sound output
that is preset by TV broadcasting station. (EX: Mono,
Stereo, SAP)
25 N5230p