Using The Tv Features; Remote Control And Tv Controls; Inserting Remote Control Batteries - ViewSonic LCD TV VS12117-1M User Manual

Using the TV Features

Remote Control and TV Controls

Inserting Remote Control Batteries

1. Remove the battery cover by pulling then lifting the knob on the cover.
2. Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment.
3. Reattach the battery cover.
CAUTION
• Only use the specified AAA batteries.
• Do not mix new and old batteries. This may result in creaking or leakage, which may pose
a risk of fire or lead to personal injury.
• Insert batteries according to (+) and (-) markings. Inserting the batteries incorrectly may
result in leakage, which may pose a risk of fire or lead to personal injury.
• Dispose of the battery in accordance with local laws and regulations.
• Keep the batteries away from children or pets.
• When the remote control will not to be used for an extended period, remove the batteries.
Remote Control and TV Controls
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Buttons located at the side of the LCD TV will operate the same as these
buttons on the remote control.
Button Description
1 SET Used for programming the remote control for other
equipment.
2 Device Used for programming the remote control for other
equipment.
buttons
Press 0 ~ 9 and "-" to select a channel. After you input
3 0~9, -
number the channel numbers, press ENTER button to direct
to the channel immediately, or wait for 3 seconds to
buttons
change automatically.
23 N5230p