Advertisement
2) If within 1 minute no black button on the front is pressed, then
it will exit the Test Mode and return back to the Time Mode.
3) While in Test Mode, sliding the Outlet Switch will demonstrate
the different functions of the clock.
4) After you are finished with the Test Mode, press any button
(expect the Snooze, Time and Lamp buttons, which has no
effect) it will exit the Test mode immediately.
time
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sonic Alert Sonic Boom SB1000
Summary of Contents for Sonic Alert Sonic Boom SB1000
- Page 1 2) If within 1 minute no black button on the front is pressed, then it will exit the Test Mode and return back to the Time Mode. 3) While in Test Mode, sliding the Outlet Switch will demonstrate the different functions of the clock. 4) After you are finished with the Test Mode, press any button (expect the Snooze, Time and Lamp buttons, which has no effect) it will exit the Test mode immediately.
- Page 2 * Press and hold the ALARM button (5) for six seconds. The clock display will show the default alarm duration as ‘30’, release the ALARM button. Pressing the blus SNOOZE button will turn the alarm signals off for nine minutes. After nine minutes, the alarm will go on again. Pressing the ALARM OFF button will turn the alarm off and automatically reset the alarm to go on at the same time the next day.
- Page 3 The software default setting is ON. If you are not using Sonic Alert remote transmitters, or if you do not want the clock to respond to a transmitter, set the mode to OFF.
Need help?
Do you have a question about the Sonic Boom SB1000 and is the answer not in the manual?
Questions and answers