Table of Contents
Advertisement
Quick Links
IMPORTANT – Please read these instructions carefully before use and retain for future
reference. See operating instructions on back.
– Use only the supplied or recomended Sonic Alert adaptor to connect the
unit.
Warning: To prevent fire or shock hazard do not expose this appliance to rain or
moisture. Before connecting to mains/ power make sure that the
requirements specified on the apparatus corresponds to the available power
supply in that country i.e. AC100-240V~, 56/60 Hz.
– The ventilation should not be impeded by covering the ventilation
openings with items such as, newspaper, table cloth, curtains, etc;
– No naked flame sources, such as lighted candles should be placed on the
apparatus.
– It shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on the apparatus.
– Do not place the product in closed bookcases or racks without proper
ventilation.
– Where the mains/ power plug is used as the disconnect device, the
disconnect device shall remain readily operable.
Model SBB500SS-v3
Sonic Boom Alarm Clock & Bed Shaker
OPERATION INSTRUCTIONS
Advertisement
Table of Contents
Related Manuals for Sonic Alert SBB500SS-v3
Summary of Contents for Sonic Alert SBB500SS-v3
- Page 1 IMPORTANT – Please read these instructions carefully before use and retain for future reference. See operating instructions on back. – Use only the supplied or recomended Sonic Alert adaptor to connect the unit. Warning: To prevent fire or shock hazard do not expose this appliance to rain or moisture.
- Page 2 MODEL SBB500ss-v3 OPERATION INSTRUCTIONS Features Alarm 1 Indicator Fast Min./ Hour Button PM Indicator / 12 or 24 Hour Snooze button / Selector Snooze Time 10) Slow Min./ Hour Adjustment/ Dimmer Button Control 11) Battery Compartment Volume Wheel 12) Alarm Mode Switch...
- Page 3 Setting Alarm 2 4) Once alarm AL1 has been set, slide “ALARM MODE SWITCH“ (12) to AL2 position. , the alarm indicator “AL2“ (17) will light up. 5) Press and hold the “ALARM SET“ (5) button and at the same time press the “FAST“...
- Page 4 Adjusting The Snooze Time The default snooze time setting is 9 minutes but you may adjust the snooze time between 1 minute and 30 minutes as desired. To adjust the snooze time: • Press and hold the SNOOZE Button (8) for four seconds. The clock display will show the default snooze time ‘9’.
- Page 5 (1) year from the date of purchase. Within this period Sonic Alert will repair or replace at our option the SBB500ss without charge for parts and labor. Simply contact our customer service department to obtain an RA...
Need help?
Do you have a question about the SBB500SS-v3 and is the answer not in the manual?
Questions and answers
how to set alarm
To set the alarm on the Sonic Alert SBB500SS-v3:
For Alarm 1 (AL1):
1. Slide the “ALARM MODE SWITCH” to the AL1 position. The “AL1” indicator will light up.
2. Press and hold the “ALARM SET” button.
3. While holding “ALARM SET,” press the “FAST” or “SLOW” button to adjust the alarm time.
4. Ensure the AM/PM indicator is correct (a lit dot in the upper-left corner means PM).
For Alarm 2 (AL2):
1. After setting AL1, slide the “ALARM MODE SWITCH” to the AL2 position. The “AL2” indicator will light up.
2. Press and hold the “ALARM SET” button.
3. While holding “ALARM SET,” press the “FAST” or “SLOW” button to adjust the alarm time.
4. Confirm the correct AM/PM setting.
This answer is automatically generated
Does Model SBB500ss-v3 automatically change for Daylight Savings Time