Sceptre U550CV-UMR User Manual page 15

GENERAL FUNCTION BUTTONS
POWER – Turns the display on or off.
1.
INFO – Shows the display info.
2.
NUMBER BUTTONS (0-9) – Press 0-9 to select a TV channel directly when you are watching the
3.
display. The channel will change after 2 seconds.
(-) – Inserts the dash for selecting digital channels directly.
4.
R – Returns to the previous channel.
5.
VOL(+)/VOL(-) – Press the VOL buttons to increase or decrease the sound level.
6.
▲/▼/◄/►/ENTER – These directional buttons allow you to move around in the display's menu.
7.
Press the ENTER button when you want to select a particular option.
CH(+)/CH(-) – Press the CH buttons to switch to the next or previous channel.
8.
MENU – Brings up the main display menu on the screen.
9.
GUIDE – Opens the current digital channel information guide (antenna only).
10.
EXIT – Exit the main display menu on the screen.
11.
SOURCE – Press this button to cycle through INPUT source.
12.
CC – Cycles between different closed captioning modes.
13.
MUTE – Turns the sound off from the display. To un-mute either press VOL(+) or press the MUTE
14.
button again.
FAV – Gives you your list of favorite channels.
15.
F.ADD/DEL – Adds or Deletes current channel from favorite list.
16.
SLEEP – Turns the TV off in a specific set of time dependent on your selection.
17.
USB – This button switches the source to USB.
18.
YPbPr – This button switches the source to YPbPr.
19.
HDMI – This button switches the source to HDMI.
20.
The following buttons are functions designed to work with the optional, Sceptre Sound Bar.
POWER – This button turns on the sound bar.
21.
SOURCE – This button selects the sound bar's source.
22.
MODE – This button selects the sound bar's sound modes.
23.
VOL(-) – This button decreases the volume of the sound bar.
24.
VOL(+) – This button increases the volume of the sound bar.
25.
Color Function Buttons
A – This button has no function assigned.
26.
B – This button turns on or off the TV's voice guidance for the visually impaired.
27.
C – This button has no function assigned.
28.
D – This button has no function assigned.
29.
Please Note:
Buttons encircled by the word SOUND BAR are to be used with a Sceptre's sound bar only.

- 15 -
www.SCEPTRE.com
SCEPTRE UMR Series UHD Display User Manual