OSD and Power Lock Settings ... 7 Adjusting the Screen Image ... 8 Main Menu Controls ... 10 Other Information Specifications ... 14 Troubleshooting... 15 Customer Support ... 16 Cleaning the LCD Display ... 17 Limited Warranty ... 18 ViewSonic VX724...
92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic compatibility,” and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety.” User Information for all Countries Notice: Use the cables which are included with the unit or specified. ViewSonic VX724...
® NERGY Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
NOTE: The CD includes the User Guide PDF files and INF/ICM display optimization files. The INF file ensures compatibility with Windows operating systems, and the ICM file (Image Color Matching) ensures accurate on-screen colors. ViewSonic recommends that you install both the INF and ICM files.
NOTE: Windows users may receive a message asking them to install the INF file. This is on the CD. 5. Insert the ViewSonic Wizard CD into the computer’s CD drive. Follow the on-screen instructions. If your computer does not have a CD-ROM drive, see “Customer Support”...
Wall Mounting (Optional) To obtain a wall-mounting kit, contact ViewSonic instructions that come with the base mounting kit. To convert your LCD display from a desk- mounted to a wall-mounted display, do the following: 1. Verify that the Power button is turned OFF, then disconnect the power cord.
Power Button Locked will display for few seconds. With or without this setting, after a power failure, your LCD display’s power will automatically turn ON when power is restored. • Power Button Unlock: Press and hold [1] and the down arrow again for 10 seconds. ViewSonic VX724...
“Main Menu Controls” on page 9. Displays the Main Menu or exits the control screen and saves adjustments. ViewSonic VX724 Main Menu with OSD controls Front Control Panel shown below in detail Scrolls through menu options and adjusts the displayed control.
Page 11
(The black border around the edge of the screen should barely touch the illuminated “active area” of the LCD display.) ViewSonic VX724 The line at the bottom of the screen shows the current functions of buttons 1 and 2:...
LCD display to more accurately display colors the way they were originally intended. Enabling the sRGB setting will cause the Contrast and Brightness adjustments to be disabled. 9300K-Adds blue to the screen image for cooler white (used in most office settings with fluorescent lighting). ViewSonic VX724...
Page 13
(vertical frequency). NOTE: VESA 1280 x 1024 @ 60Hz (recommended) means that the resolution is 1280 x 1024 and the refresh rate is 60 Hertz. Manual Image Adjust displays the Manual Image Adjust menu. ViewSonic VX724...
Page 14
Language select allows the user to choose the language used in the menus and control screens. Resolution Notice displays the Resolution Notice menu shown below. Resolution Notice advises the optimal resolution to use. OSD Position allows the user to move the on-screen display menus and control screens. ViewSonic VX724...
Page 15
Memory Recall returns the adjustments back to factory settings if the display is operating in a factory Preset Timing Mode listed in the Specifications of this manual. Exception: This control does not affect changes made with the User Color control, Language or Power Lock setting. ViewSonic VX724...
Preset Timing Mode (pre-adjusted to VESA Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result in permanent damage to the LCD display. Macintosh computers older than G3 require a ViewSonic ViewSonic. ViewSonic VX724 17”...
Loose or broken pins in the cable connector could cause an improper connection. • Connect the LCD display to another computer. • If you have an older graphics card, contact ViewSonic Control buttons do not work • Press only one button at a time.
Southeast www.viewsonic.com.sg Asia, and India South Africa and other www.viewsonic.com countries Hong Kong www.hk.viewsonic.com ViewSonic VX724 T = Telephone Email F = FAX T= (800) 688 6688 service.us@viewsonic.com F= (909) 468 1202 T= (886) 463 4775 service.ca@viewsonic.com F= (909) 468 1202 T= (0800) 833 648 service.eu@viewsoniceurope.com...
LCD display screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the LCD display. • ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol- based cleaners. ViewSonic VX724...
ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.